1964 Impala

New Shifter

Parts include cable mounting system; neutral safety/backup light switch; flexible mounting system; Cable sold separately.

Use for TH350, TH400, Th200-4R, TH700-R4 and 4L60’s.

Click Here to Order

See cable version installed in 1964 AND 1966 Chevelle

Step by Step Installation

Video

Powerglide Shifter Conversion Kit

This kits allows use of your 1964 factory-installed console shifter with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200-4R, or 4L60) transmission. This kit eliminates the rod linkage and replaces it with a cable. Kits are available with or without cable. Use ONLY our cable or GM#3956765. No other reproduction cables are recommended due to quality issues.

The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shifter lever, all necessary hardware, and instructions.

1964 Impala 3 speed Conversions TH350 & TH400 #SC2051 . . . .$104.00
TH350 & TH400 with Cable #SC2051-C . . . .$175.00
RECOMMENDED FOR ALL CONVERSIONS *Backup and Safety Switch: TH350 & TH400 and OverDrive Transmissions** #S500 . . . .$52.50 * For 1964 this switch is not an exact reproduction. It uses bayonet connectors and is turned "out" not in. Nevertheless it can be used. Note: This switch is different than your Powerglide switch. It looks the same on the outside, but the internal contacts are set for the TH. Do I need this switch? See FAQ Video
Shifter Cable GM Cable #3956765 #C100 . . . $97.75 NOTE: Customers please keep in mind that GM cables come in GM wrappers and cost about $100. If you buy a cable with this GM number and it only costs like $40+ and is not in a GM wrapper, THEN it is NOT a GM cable
Shiftworks© Cable More flexibility, adjustable, stainless, Non-booted modern dry sweep design. #K100….$74.50 Warning: Shiftworks does not recommend any other “reproduction” cable besides the GM cable and our cable. All cables are not created equal. Check it out. Video of cables exposed. Lesson 1	Click image for closup
Kickdown Cable TH350 #S530 . . .$44.50
Kickdown Bracket Small Block #S531 . . .$12.50
Shifter Release Button #4160 . . .$12.50 Do not re-install new button without Release Spring. Use original or purchase new. See Below S501.
Release Spring #S501. . . $4.50 This spring must be used under the shifter release button for proper operation of shifter. (Often Missing)
1964 Impala 4 speed Conversions TH700-R4, TH200-4R or 4L60 #S2061. . . $104.00
TH350 & TH400 with Cable #SC2061-C . . . .$175.00
RECOMMENDED FOR ALL CONVERSIONS *Backup and Safety Switch: TH350 & TH400 and OverDrive Transmissions** #S500 . . . .$52.50 * For 1964 this switch is not an exact reproduction. It uses bayonet connectors and is turned "out" not in. Nevertheless it can be used. Note: This switch is different than your Powerglide switch. It looks the same on the outside, but the internal contacts are set for the TH. Do I need this switch? See FAQ Video
Shifter Cable GM Cable #3956765 #C100 . . . $97.75 NOTE: Customers please keep in mind that GM cables come in GM wrappers and cost about $100. If you buy a cable with this GM number and it only costs like $40+ and is not in a GM wrapper, THEN it is NOT a GM cable
Shiftworks© Cable More flexibility, adjustable, stainless, Non-booted modern dry sweep design. #K100….$74.50 Warning: Shiftworks does not recommend any other “reproduction” cable besides the GM cable and our cable. All cables are not created equal. Check it out. Video of cables exposed. Lesson 1	Click image for closup